小分隊員的博客
獨樂樂不如眾樂樂
正文
我一直想把Garmin的GPS軟件給裝到支持GPS的windows Mobile的手機上。這裏找到一個Garmin的XT軟件和安裝方法，非常簡單。先給大家發出來看看。
名稱：Garmin Mobile XT for Windows Mobile v.5.00.20w + Basemap + Support Files
下載：http://www.megaupload.com/?d=EANBJQRE
注意：這個隻有basemap，需要自己裝詳細地圖。具體安裝方法應該是跟GPS的安裝方法一樣。建議用方法2，直接把已經解碼的gmapsupp.img拷貝到SD卡上的Garmin文件夾下就應該可以了。
本人沒有測試（GPS手機還沒到手）
具體安裝方法（來自readme.txt文件）：
1. No installation needed. Basicly just copy folder to memory card and run the keygen to activate the application.Detailed instructions:1. Extract archive
2. Copy the "Garmin" folder to a blank memory card with at least 1.6 GB free space
3. Insert the card in your Windows Mobile device
4. Use the file explorer to browse to the "Garmin/VM" folder on the memory card
5. Run the program file for your platform, QuePPC.exe for PocketPC or QueSP.exe for Smartphone
6. Tap "Connect to Garmin GPS" then tap "Skip", confirm that you want to skip.
7. Tap to accept the safaty warning
8. Select Tools - Settings - down arrow - About
9. Take a note of your device id.
10. Quit the program and remove the memory card, connect it to your computer again.
11. Start "garmin_keygen_v1.5.exe"
12. Enter your device id and click "Generate"
13. Copy the 25 character code
14. Open the file "sw.unl" from the "Garmin" folder on your memory card with a text editor.
15. Paste the code replacing the XXXXXXXXX and save the file.
16. Repeat steps 3, 4 and 5.
17. You're all set.
This release was tested and working with a Dell Axim X50v Windows Mobile 6 and a Bluei Bluetooth GPS receiver.Application, basemap and support files were downloaded directly from Garmins website: http://www.garmin.com/support/collection.jsp?product=010-11034-00
附：注意，如果用Cell Phone的ID產生的解碼不工作的話，那在產生解碼時必須進行ID轉換，也就是要把Cell Phone的IMEI號碼轉成Garmin的10位數ID，然後再產生解碼。用這個小軟件來轉換：
http://www.megaupload.com/?d=8DJH5MCS
名稱：Garmin Mobile XT for Windows Mobile v.5.00.20w + Basemap + Support Files
下載：http://www.megaupload.com/?d=EANBJQRE
注意：這個隻有basemap，需要自己裝詳細地圖。具體安裝方法應該是跟GPS的安裝方法一樣。建議用方法2，直接把已經解碼的gmapsupp.img拷貝到SD卡上的Garmin文件夾下就應該可以了。
本人沒有測試（GPS手機還沒到手）
具體安裝方法（來自readme.txt文件）：
1. No installation needed. Basicly just copy folder to memory card and run the keygen to activate the application.Detailed instructions:1. Extract archive
2. Copy the "Garmin" folder to a blank memory card with at least 1.6 GB free space
3. Insert the card in your Windows Mobile device
4. Use the file explorer to browse to the "Garmin/VM" folder on the memory card
5. Run the program file for your platform, QuePPC.exe for PocketPC or QueSP.exe for Smartphone
6. Tap "Connect to Garmin GPS" then tap "Skip", confirm that you want to skip.
7. Tap to accept the safaty warning
8. Select Tools - Settings - down arrow - About
9. Take a note of your device id.
10. Quit the program and remove the memory card, connect it to your computer again.
11. Start "garmin_keygen_v1.5.exe"
12. Enter your device id and click "Generate"
13. Copy the 25 character code
14. Open the file "sw.unl" from the "Garmin" folder on your memory card with a text editor.
15. Paste the code replacing the XXXXXXXXX and save the file.
16. Repeat steps 3, 4 and 5.
17. You're all set.
This release was tested and working with a Dell Axim X50v Windows Mobile 6 and a Bluei Bluetooth GPS receiver.Application, basemap and support files were downloaded directly from Garmins website: http://www.garmin.com/support/collection.jsp?product=010-11034-00
附：注意，如果用Cell Phone的ID產生的解碼不工作的話，那在產生解碼時必須進行ID轉換，也就是要把Cell Phone的IMEI號碼轉成Garmin的10位數ID，然後再產生解碼。用這個小軟件來轉換：
http://www.megaupload.com/?d=8DJH5MCS
評論
目前還沒有任何評論
登錄後才可評論.
