關於設置D-Link wireless router

Setup Internet:
To set up, log into the router using your WEB browser: type http://10.1.1.1 in the address bar and press Enter. The router login prompt should come up. Enter username 'admin' and password 'admin' (default setting).

Click on Home tab and then on WAN on the left side of the screen. Select PPPoE/PPPoA option.

Under Connection Type select "PPPoE LLC" in the drop-down menu. Enter username and your password.
Please confirm with Bigpond what format of the username is required: username@bigpond [e-mail]
VPI/VCI settings in Australia are typically 8/35. Click on Apply.

To save the settings into the router's memory go to Tools > [System] > Save and Reboot. Give the router a minute or two to reboot and reconnect. Restart your computer and you should be able to access the Internet.

------------------------------------------------------------
Setup Wireless:

Step 1. Open your web browser and enter the IP address of the router (10.1.1.1). Enter user name (admin) and your password (admin).

Step 2. Click on Wireless button on the left side of your screen.

Step 3 Tick the Enable AP option. Click on Apply.

Step 4. Specify a security key (this can be any set of numbers/letters): Under Security select WPA. Select the 'WPA-PSK String' option and specify a passphrase/key. The key should be at least 8 characters long. Click on Apply.

Step 5. To save settings into the router's memory go to Tools > [System] > Save & Reboot. Click on the Save & Reboot button. This will save the settings and reboot the router.