You have three options to choose from to update your OBi's firmware:
Options 1 & 2 - Automated Update:
1. Devices that have been added to OBiTALK will see an associated yellow triangle
which can be selected to invoke an automated update process.2. Devices may be updated via the touch-tone phone attached to the OBi or the IP phone dial pad. Dial *** 6 and confirm the update (if available).
Option 3 - Manual Update:
3. Download the latest firmware for your device from the link below and follow the instructions to manually update your OBi using a web browser opened to the OBi device's local management web page.
 |
OBi100 & OBi110 Universal Adapters: OBi100/OBi110: http://fw.obihai.com/OBi-latest.fw 1-3-0-2886 (2.1MB) Last Update May 2016. |
 |
OBi2 & OBi3 Series Universal Adapters: OBi200/202/300/302: http://fw.obihai.com/OBi2-latest.fw 3-0-1-5264 (10.4MB) Last Update May 2016 |
 |
OBi5vs Series Universal Adapters: OBi504/508: OBi 5vs Firmware 4-0-1-5235 (16MB) Last Update April 2016 |
 |
OBi1000 Series IP Phones: OBi1032/1062: http://fw.obihai.com/OBiPhone-latest.fw?v=2 5-0-0-3223 (26.6MB) Last Update December 2015 |
Manual Update Instructions:
1. Download the above linked file to your computer.
2. Access the web page of the OBi device (OBi via Internet/WAN Port):
- From a phone attached to the PHONE port of the OBi dial * * * 1
- The IP address of the OBi will be read to you
- Open a new browser window on your PC and enter the IP address of the OBi.
E.g. 192.168.1.110 - When prompted, enter "admin" for username and "admin" for password.
If you have previously changed the password, use that instead of "admin." - OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN port IP (Gateway) address is: 192.168.10.1
- OBi202/OBi302 Note: To access the integral web page via the WAN port, you may need to enable WAN access. To do this, from the connected phone dial ***0. Next, enter 30# - Press 1 to enter a new value - Press 1# to enable - Press 1 to save.
3. Now that you have accessed the OBi web page, go to the "System Management" - "Device Update" page. From there, "Browse" to the firmware file you just downloaded above and click Update.
4. Wait for the OBi to restart (approx. 30-60 seconds) and you will be good to go.
Logged