我的木工工具-壓刨(Thickness Planer)
文章來源:
woodsensor
於
2014-03-08 19:04:39
我的壓刨是德偉735(DW735),該機器有3個刀片,雙速調控,最大木頭通過厚度為6英寸。我已經用過兩個同樣的機器,目前是第三個,前麵兩個基本用1-2年就買了,添點錢重新買新的。
這款機器對從家庭木工坊規格的使用者來的評價等級很高,在西方的木工愛好者中非常普及。但是經過多年使用,發現這款機器有幾個缺點,一是噪音巨大,運行時可以達到100-120dB,不帶放噪耳機久了肯定會對聽力有影響,二是對15amp的電路來說,如果進刀過深,容易造成配電箱跳閘,還有就是換刀的費用不菲。
和其它機器一樣,我也給它做了個架子,裝上滾輪,下麵放砂輪打磨機,以充分利用空間。
產品特點如下
Product Features
Powerful 15.0 Amp, 20,000 rpm motor handles larger cuts in wider materials with ease
Three knife cutter-head with 10,000 RPM cutter head speed delivers 30% longer knife life and makes knife change faster and easier
Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
19-3/4" cast aluminum base is 2X more rigid than a standard 10" base and folding tables
Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
Extra-large turret depth stop allows user to return to most frequently used thicknesses with ease
機器指標如下
Specifications
Amps
15.0Amps
No Load Speed
20,000 (motor)/10,000 (cutterhead)rpm
Max Depth of Cut
1/8"
Depth Capacity
6"
Width Capacity
13"
Tool Weight
92lbs
Shipping Weight
100lbs